Optical Fusion Splicer (KL-280)

Features
- Fiber core can be display clearly
- SingleX or Y view and X & Y view simultaneously
- Auto check quality of cleaved end face
- Auto select best splicing program
- 9 seconds splice time and 30 seconds heat time
- Small bulk and light weigh
- 5 inch color LCD monitor with clear digital image display
- Simple Operation menu

Specefications Model KL-280
Applicable fibers SM (ITU-T G. 652), MM (ITU-T G. 651), DS (ITU-T G. 653), NZDS (ITU-T G. 655)
Fiber cleaved length 8~16mm(Coating diameter: 250µ M) 16mm(Coating diameter: 250 ~ 1000µ M)
Fiber diameter Cladding diameter: 80 ~150µ M Coating diameter: 100~ 1000µ M

Fiber Count Single
Fiber aligning method Core aligning
Return loss >60dB
Actual average splice loss 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS)
Splicing mode auto
Splicing mode 12(templet), 188(user)

Typical Splicing time Typical 9 sec, with standard SM fiber
Protection sleeve length 60mm, 40mm and a series of micro sleeves
Storage of splice result 5000 results, 3 parameter per result
Tension test 2N
Fiber display and magnification 400X(X or Y view), 200X(X and Y view)
Tube heating time Typical 30 sec
Electrode life 2500

No. Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner Li-battery
Display screen 5 inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals RS 232
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50? , respectively, Max. Wind velocity of 15m/s
Power supply AC 100-240V with AC adapter; Inner Li-battery(6600mAh)
Dimensions 150mm(L) x150mm (W) x160mm (H)
Weight 3.52 Kg including battery

Functions Model KL-280
Splicing mode Auto
Fiber cleave dangle threshold set 0.5-8° , 0.5° Step
Auto aligning Yes

Includes:
- Jilong KL-280 Fusion Splicer
- KL-21B High Precision fiber cleaver
- CFS-2 fiber stripper
- Internal rechargeable Li battery
- AC adaptor
- AC Power cord
- Custom Hard Carrying Case
- Spare electrodes
- Cooling tray
- Cleaning tools
- Operating manual.